ESky-Parts Radio-Transmitter-TX ESky-Parts » ESky Belt CP ESky-Parts » ESky Honey Bee King3 ESky-Parts » ESky Belt CP V2 EK2-0704B Professional Head Lock Gyro
[EK2-0704B]
DESCRIPTION
New ESky Head Locking Gyro EK2-0704B
EK2-0704B can be used with 4 channels transmitters only in Head Lock Mode. On ESky Belt-CP and Honey Bee King 2 with EK2-0406A and EK2-0406G transmitter will work, however the transmitter remote gyro gain function will need to be disabled.
Specification:
# Input signal:1.5±0.5ms
# Input power: 5~6VDC
# Weight: 12.5g
# Size: 27 x 28.5 x 18mm
Feature Illumination:
# can be used on Engine and Electric Helicopters
# dual sensibility adjusting - nose locked model and standard model;
# suitable for 4ch and 6ch transmitter;
# with a built-in temperature equalizing electro circuit;
# to both 6CH and 4CH transmitters, the gain value can be adjusted through crust
Installation:
# The EK2-0704B headlock gyro must be installed horizontally (LED faces upward)
# the headlock gyro (3pins) cable should connect to the channel 4 on the receiver
# the tail servo should connect to the headlock gyro
# you can choose not to connect the single orange cable to channel 5 on the receiver. if the gain of the headlock gyro > 50, it is in the head locking mode. If gain < 50, it will be in the normal mode
# please tie up all the cables before fly, this is to prevent loose cables to touch the main gear or motor
|
