Receptores/RX Corona Synthesized 8Ch Dual Conversion Receiver for Futaba Hitec
[RX-FM-RP8D1]
DESCRIPTION
Corona Synthesized 8Ch Dual Conversion Receiver for Futaba Hitec JR PPM Transmitter RP8D1
(35/72/ 42mhz available)
Size: 48x21x12mm(1.9"x0.8"x0.4")
Range: >1.5km/4900ft
Sensitivity: better than 2.0μv
Selectivity: ±8 kHz at 65 dBdown
Number of Channel: 1-8
Filtering: Dual turned RF circuitry，Dual 4 pole ceramic filter，DSP filtering with mild algorithm
Modulate: FM/PPM
Intermediate Frequency: 10.7MHZ
IP3: +10dBm
Operating voltage: 4.8V～6.0VDC
Operating current: 17mA
Throw away your crystals, say goodbye to glitches! The new Corona synthesized receiver is here!
This unit will work with existing Synthesized transmitters or crystal transmitters. In fact the accuracy of this receiver will improve the performance of all 72mhz crystal transmitters. This unit has the longest range available from any Corona receiver plus a sensitivity greater than 2uV. Tests have shown the range to be more than 1 mile!
The new technology put into the synthesized series of Corona receivers is truly outstanding and will certainly make you think twice about upgrading to a more expensive 2.4GHz
Specifications
Dual Conversion
Size (36x18x8.2mm)
Weight 9.2g
Channels: 8
Shift: Auto Detect (Positive / Negitive)
Technical Data
- Synthesized receiver gets rid of the inconvenience of using the crystal. Receivers with crystal still use the technology of 1970's which have to switch the frequency by changing the crystal. Users have to bring dozens of crystal to flying field. In addition, every changing of the crystal may damage the electron devices. While it is only need to push the button, you can switch to any channel with synthesized receiver.
- Every transmitter and receiver has production tolerance inevitably. But the production tolerance of the crystal affects it most. Even the most precise crystal has the tolerance of 1-2KHz, and sometimes it will be 4KHz. This is a big tolerance to a 10KHz narrow receiver. Synthesized receiver will correct the tolerance because it can automatically follow the frequency tolerance. It is what will make R/C receiver has the best performance.
- Long Range
While using the powerful chip, corona designs more and distributes the plus of all levels carefully.
The range of PR4S1 is longer than RS410, RS610 and RS810 series. With a sensitivity of better than 2μV, the receiver range can reach as far as 1 mile on the ground even better.
- Ultra Narrow
Usually R/C equipments are used under a busy RF environment, so the band of the receiver must be very narrow. Only one way can ensure the narrow bandusing the expensive multiple ceramic IF filter. Corona promises that all receivers use 4 pole ceramic IF filter and make sure all the receivers have an ultra narrow band.
- AGC and High IP3 Performance
RP4S1 was designed with a more reasonable and scientific way. It adds an AGC circuit to make itself have a higher IP3. With this technology, it can reject adjacent interference and high frequency block effectively.
- Auto-detecting
Same with all Corona receivers, RP6D-1 auto-detects the shift type (positive or negative) and is compatible with most brand transmitters
- DSP
Nowadays, DSP decoding technology is used by all top grade receivers. Based on the experience of the manufacturing crystal receiver, the arithmetic is more advanced and it works more reliable.
You can hardly notice the glitch of the FM receiver and have no noise problem.
- ?1-button? Frequency Tune
The frequency can be changed easily with PPL technology. Corona uses this tune button to compensate the frequency difference caused by production tolerance of the transmitter and the frequency wrap of difference brand transmitter. Only 1-button, RP4S1 makes it possible to compensate the frequency tolerance immediately.
|
